Características principales
- Carcasa completamente metálica y sonido claro
- Hermético al polvo y al agua: IP66
- Alimentado desde el cable de red IP mediante PoE+
- Configuración remota y actualización de Firmware por HTTPS
Arquitectura del Sistema
Detalle de productos
Product Information
Model
AU-001
Rated Impedance
8 ohm
Average Min. Power
20 W
Voice coil Former
Kapton Bobbin spherical polyimide 16 ohm
Frequency Ranges
330 Hz~ 8000 Hz
Max. SPL 1W / 1M
106 dB
Material
Aluminum cast powder painting
Microphone
100Hz-16KHz Single point, SPL-44 ± 2db AT 2 KΩ
LED Luminous
1x LED display status
Network
SIP Support
RFC 3261(SIP base standard)
Interface
WAN: RJ-45x1, 10/100Mbps Fast Ethernet port
Supported Protocols
SIP, IPv4/v6, RIPv2 / OSPF, HTTPS, QoS DSCP, FTP, TFTP, SNMP v2c / v3, SNMP, IGMP, DHCP, SSHv2, PIM- DVMRP, RMON
Audio Codec
G.711 a/uLaw, G.726, G.722, G.729, iLBC, L16
Support Function
Auto provision, Audio tone testing, System log
Security
Password protection, IP address filter, user access log, authentication
VAST 2 Integration (Extension License Required)
Two-way Communication
Supported
Automatic Trigger Audio Clips
Supported
General
Casing
Robust aluminum, IP-66 water/dust proof
Power
PoE+ (Power over Ethernet), IEEE 802.3at
Operating Temperature
-35°C ~ 60°C (-95°F ~ 140°F)
Dimensions
280 x 200 x 280 mm (11 x 7 x 11 inch)
Weight
1.95 kg (4.3lbs)
Certifications
CE, FCC, LVD EN62368-1
Warranty
24 months
En la misma categoría
Fanvil
Fanvil FH-S01
FH-S01 es un altavoz de techo SIP con funcionalidades de paginación, multidifusión, radiodifusión y talkback.
Bocina Altavoz de Red